Events and Training

Program duration is 2-hours. The Occupational Safety and Health Administration (OSHA) mandates specific training requirements for the Control of Hazardous Energy, commonly referred to as lockout/tagout (LOTO). This program is designed to satisfy the training requirements in 29 CFR 1910.147 for Authorized Employees. Authorized employees are individuals who lockout or tagout machines or equipment in order to perform servicing or maintenance where unexpected startup could be hazardous.

Date: August 27, 2019
Start time: 8:00 a.m
End time: 10:00 a.m
Price: $250.00

Program duration is 2-hours.  The Occupational Safety and Health Administration (OSHA) requires that employees in an industrial setting working at heights 4 feet or greater from and unprotected edge must use fall protection. This program will discuss working near unprotected edges, the usage of manlifts and ladders as covered under OSHA regulations (29 CFR 1910.23, 1910.28, 1910.29, 1910. 68 and 1910.140).

Date: August 29, 2019
Start time: 8:00 a.m
End time: 10:00 a.m
Price: $250.00

Program duration is a full day (8-hours) and will combine several initial and refresher training requirements established by the Occupational Safety and Health Administration (OSHA) in 29 CFR 1910.120. A basic description of each requirement is provided below:

First Responder Awareness
First Responder Operations
Emergency Response Refresher
Site Worker Refresher and Site Supervisor Initial/Refresher

Date: September 12, 2019
Start time: 8:00 a.m
End time: 4:00 p.m
Price: $300.00

Program duration is 6-hours. Part one of this training program is designed to satisfy the training requirements in 49 CFR 172.704 for Hazardous Material Employees (Hazmat Employee) as defined in 49 CFR 171.8. The second part of this training program covers Dangerous Goods Regulations Section 1.5 (60th Edition 2019) for employees who perform Hazmat employee functions for the transport of Dangerous Goods by air both domestically and internationally.

Date: September 19, 2019
Start time: 08:00 a.m
End time: 3:00 p.m
Price: $275.00

Program duration is half day (4-hours) and is designed to satisfy the training requirements or general awareness for the following:

Large Quantity Generators (LQG) Hazardous Waste
Small Quantity Generators (SQG) Hazardous Waste
Large Quantity Handler (LQH) Universal Waste
Small Quantity Handler (SQH) Universal Waste

Date: November 07, 2019
Start time: 8:00 a.m
End time: 12:00 p.m
Price: $240.00

Program duration is a half day (4-hours). Program is designed to satisfy the training requirements in 49 CFR 172.704 for Hazardous Material Employees (Hazmat Employee) as defined in 49 CFR 171.8.

Date: November 7, 2019
Start time: 12:30 p.m
End time: 4:30 p.m
Price: $240.00

Program duration is 2-hours. The Occupational Safety and Health Administration (OSHA) mandates specific training requirements regarding employees involved in entry into confined spaces as defined in 29 CFR 1910.146. This training will cover the following topics:

• Recognition of a permit required confined space versus non-permit confined space;
• Roles and responsibilities of the entrant, attendant and supervisor;
• Permit writing requirements;
• Identification of hazardous energy sources;
• Monitoring requirements; and
• Confined space rescue.

Date: November 12, 2019
Start time: 08:00 a.m
End time: 10:00 a.m
Price: $250.00

Program duration is 2-hours. Part one of this training program covers the Occupational Safety and Health Administration (OSHA) requirements that hazardous chemicals used or store on site must have their hazards communicated to employees. This OSHA requirement is referred to as the hazard communication standard, more commonly referred to as HAZCOM (29 CFR 1910.1200). Part two of this program covers OSHA’s training requirements for the proper selection and use of personal protective equipment (PPE). Employees that are required to use PPE during work tasks to keep them safe must receive training as stated under OHSA subpart I Personal Protective Equipment (29 CFR 1910.132 – 1910.140).

Date: November 14, 2019
Start time: 08:00 a.m
End time: 10:00 a.m
Price: $250.00

Program duration is 3-hours. This training will discuss the Occupational Safety and Health Administration’s (OSHA) subpart O Machine Guarding (1910.211-1910.219). During the training we will discuss the basics of machine guarding and how to protect employees from machine related hazards.

Date: November 19, 2019
Start time: 8:00 a.m
End time: 10:00 a.m
Price: $250.00

Program duration is 2-hours. The Occupational Safety and Health Administration (OSHA) mandates specific training requirements for the Control of Hazardous Energy, commonly referred to as lockout/tagout (LOTO). This program is designed to satisfy the training requirements in 29 CFR 1910.147 for Authorized Employees. Authorized employees are individuals who lockout or tagout machines or equipment in order to perform servicing or maintenance where unexpected startup could be hazardous.

Date: December 03, 2019
Start time: 8:00 a.m
End time: 10:00 a.m
Price: $250.00

Program duration is a full day (8-hours) and will combine several initial and refresher training requirements established by the Occupational Safety and Health Administration (OSHA) in 29 CFR 1910.120. A basic description of each requirement is provided below:

First Responder Awareness
First Responder Operations
Emergency Response Refresher
Site Worker Refresher and Site Supervisor Initial/Refresher

Date: December 05, 2019
Start time: 8:00 a.m
End time: 4:00 p.m
Price: $300.00

Program duration is 6-hours. Part one of this training program is designed to satisfy the training requirements in 49 CFR 172.704 for Hazardous Material Employees (Hazmat Employee) as defined in 49 CFR 171.8. The second part of this training program covers Dangerous Goods Regulations Section 1.5 (60th Edition 2019) for employees who perform Hazmat employee functions for the transport of Dangerous Goods by air both domestically and internationally.

Date: December 10, 2019
Start time: 08:00 a.m
End time: 3:00 p.m
Price: $275.00

Program duration is 2-hours.  The Occupational Safety and Health Administration (OSHA) requires that employees in an industrial setting working at heights 4 feet or greater from and unprotected edge must use fall protection. This program will discuss working near unprotected edges, the usage of manlifts and ladders as covered under OSHA regulations (29 CFR 1910.23, 1910.28, 1910.29, 1910. 68 and 1910.140).

Date: December 12, 2019
Start time: 8:00 a.m
End time: 10:00 a.m
Price: $250.00